How to Restore an Old Vape Coil: Tips and Tricks

Are you tired of constantly replacing your vape coils? Do you have old, burnt coils lying around that you wish you could restore? Restoring an old vape coil can save you money and time, and it’s easier than you might think. In this article, we will explore some methods for restoring old vape coils and getting the most out of your vaping experience.

One popular method for restoring an old vape coil is to soak it in vinegar overnight and then gently scrape away any blackened areas. However, this method may not be effective for all coils and can leave a nasty taste of cotton from the homemade wick. Another option is to dry-burn the coil, which involves heating it until the gunk burns off. While this method can be effective, it can also be dangerous if not done properly.

Fortunately, there are other methods for restoring old vape coils that are both safe and effective. For example, you can try cleaning the coil with warm water and letting it air-dry completely before reusing it. You can also give the coil head and the tank a deep clean to remove any encrusted bits of vape juice. By following these simple steps, you can extend the life of your vape coils and enjoy a smoother, more flavorful vaping experience.

Understanding Vape Coils

https://www.youtube.com/watch?v=exkYqQ2Hlco&embed=true

When it comes to vaping, one of the most important components is the vape coil. The vape coil is responsible for heating up the e-liquid and turning it into vapor. Understanding how vape coils work is crucial in knowing how to restore an old vape coil.

Vape coils are made up of a wire that is wrapped around a wick. The wire is typically made of kanthal, stainless steel, or nickel. The wick is made of cotton or another absorbent material that holds the e-liquid. When the vape coil is heated, the e-liquid is vaporized and inhaled.

There are different types of vape coils available on the market, including single-coil, dual-coil, and quad-coil. Single-coil vape coils are the most common and easiest to use. Dual-coil and quad-coil vape coils are more advanced and produce more vapor.

Vape coils have a limited lifespan and will eventually burn out. When a vape coil burns out, it will produce a burnt taste and will need to be replaced. However, there are ways to extend the life of a vape coil and restore an old vape coil.

Some ways to restore an old vape coil include cleaning the coil, removing any built-up residue, and replacing the cotton wick. It’s also important to avoid using e-liquids that are high in sweeteners, as this can cause damage to the coil and cause it to burn out faster.

By understanding how vape coils work and how to restore an old vape coil, you can save money and enjoy a better vaping experience.

Signs of a Failing Vape Coil

If you’re an avid vaper, you know how important it is to have a functioning vape coil. A failing coil can lead to burnt hits, poor flavor, and decreased vapor production. Here are some signs that your vape coil may be failing:

• Burnt Taste: If you’re experiencing a burnt taste in your vape, it’s time to replace your coil. A one-time hit off a burnt coil won’t have terrible consequences. However, if you use the same coil repeatedly, you will experience a burnt taste from the vape juice, and the inner mechanism of your vape mod will be gravely affected.

• Less Vapor Production: If you aren’t getting as much vapor from your device as you are used to, it’s another sure sign that you need to replace your coil. When your coil burns out, it may not heat up as efficiently afterward, and less heat means less vapor produced. Popping in a new coil should sort this issue so you can get back to enjoying your vaping experience.

• Leaking E-Liquid: If your e-liquid is leaking from your tank, it could be a sign that your coil needs to be replaced. A failing coil may not be able to vaporize the e-liquid properly, causing it to leak out of the tank.

• Gurgling Sounds: If your vape device is making gurgling sounds, it could be a sign that your coil is failing. A failing coil may not be able to vaporize the e-liquid properly, causing it to build up in the tank and create gurgling sounds.

• Hot Spots: If you’re experiencing hot spots in your coil, it means that some parts of the coil are heating up more than others. This can lead to a burnt taste and decreased vapor production. Hot spots can be caused by a variety of factors, including a dirty coil or a coil that has been used for too long.

If you’re experiencing any of these signs, it’s time to replace your vape coil. Replacing your coil regularly will ensure that you have a great vaping experience every time.

Materials Needed for Coil Restoration

https://www.youtube.com/watch?v=uokI7gbN7cI&embed=true

Restoring an old vape coil requires a few materials. These materials are essential to ensure that the process is successful and that the coil works as it should. Here are the materials that you need to restore an old vape coil:

1. Cotton

You will need cotton to replace the old wick. Cotton is an absorbent material that holds the e-juice and delivers it to the coil. It is important to use high-quality, organic cotton that does not contain any chemicals or additives. This will ensure that the cotton does not affect the flavor of the e-juice.

2. Wire Cutters

You will need wire cutters to cut the wire to the desired length. It is important to use wire cutters that are designed for use with vape coils. This will ensure that the wire is cut cleanly and does not fray.

3. Wire

You will need wire to create a new coil. There are different types of wire available, including Kanthal, Nickel, and Stainless Steel. Each type of wire has its own unique properties and is suitable for different types of vaping.

4. Coil Jig

A coil jig is a tool that helps you create a perfect coil every time. It is a small, handheld device that allows you to wrap the wire around a rod to create a coil of the desired size.

5. Ohmmeter

An ohmmeter is a device that measures the resistance of the coil. It is important to use an ohmmeter to ensure that the coil has the correct resistance. This will ensure that the coil works as it should and does not cause any damage to your device.

6. Scissors

You will need scissors to cut the cotton to the desired length. It is important to use scissors that are sharp and clean to ensure that the cotton is cut cleanly.

7. Screwdriver

You will need a screwdriver to install the coil in your device. It is important to use a screwdriver that is the correct size for your device to ensure that the coil is installed securely.

By having these materials on hand, you will be able to restore an old vape coil and enjoy a great vaping experience.

Safety Precautions

Before attempting to restore an old vape coil, it’s important to take some safety precautions to ensure your own safety and the longevity of your device. Here are some tips to keep in mind:

• Turn off your device: Always make sure to turn off your device before attempting to remove or repair any parts. This will prevent any accidental firing or damage to the device.

• Wear gloves: It’s a good idea to wear gloves when handling an old vape coil as it may be covered in residue or debris that could be harmful to your skin. Nitrile gloves are a good option as they are resistant to chemicals and provide good protection.

• Clean your workspace: Make sure your workspace is clean and free of any flammable materials before attempting to restore an old vape coil. This will reduce the risk of fire or other accidents.

• Use the right tools: Always use the right tools for the job. Using the wrong tool can damage your device or cause injury. A coil jig, pliers, and a screwdriver are some of the tools you may need to restore an old vape coil.

• Be gentle: When removing an old vape coil, be gentle to avoid damaging any other parts of the device. Use a gentle twisting motion to loosen the coil from the posts.

By following these safety precautions, you can minimize the risk of injury or damage to your device while restoring an old vape coil.

Cleaning the Vape Coil

To restore an old vape coil, you need to clean it thoroughly. Cleaning the vape coil will help remove any built-up residue, gunk, or debris that may be affecting the coil’s performance. Here’s how you can clean your vape coil.

Soaking the Coil

The first step is to soak the coil. You can use transparent alcohol like ethanol or vodka (vinegar if you prefer) to soak the coil. Soaking the coil will help remove any stubborn residue or gunk that has built up on the coil. Simply immerse the coil in alcohol or vinegar for about 30 minutes.

Rinsing the Coil

Once you have soaked the coil, rinse it under running water to remove any remaining residue or gunk. You can also use a coil cleaning tool to clean the coil thoroughly. Be sure to rinse the coil thoroughly to ensure that all the residue is removed.

Drying the Coil

After rinsing the coil, dry it thoroughly. You can use a paper towel or a cloth to dry the coil. Make sure that the coil is completely dry before using it again. Drying the coil will help prevent any damage to the coil and ensure that it works properly.

Cleaning your vape coil regularly will help extend its lifespan and ensure that it performs optimally. By following these simple steps, you can restore an old vape coil and enjoy a better vaping experience.

Reassembling Your Vape

Now that you have successfully restored your old vape coil, it’s time to reassemble your vape. Here are the steps to follow:

1. Take the coil out of the vinegar solution and rinse it thoroughly under running water to remove any remaining vinegar and residue.

2. Dry the coil with a paper towel or let it air dry for a few minutes.

3. Place the coil back into the tank and screw it back onto the body of the vape.

4. Fill the tank with your preferred e-liquid. Make sure not to overfill it as it can cause leakage.

5. Let the tank sit for a few minutes to allow the e-liquid to soak into the coil. This process is called priming and helps prevent dry hits or burnt taste.

6. Once the coil is fully primed, turn on your vape and start vaping.

Remember to check your vape regularly to ensure that it’s working correctly. If you notice any issues, such as a burnt taste or decreased vapor production, it may be time to replace your coil again.

By following these steps, you can extend the life of your vape coil and save money in the long run.

Testing Your Restored Coil

Once you have restored your old vape coil, it’s important to test it before using it again. This will ensure that it’s working properly and won’t give you a burnt taste or other issues.

To test your restored coil, follow these steps:

1. Reassemble your vape: Put your restored coil back into your vape and fill the tank with e-liquid.

2. Prime the coil: Before using your vape, it’s important to prime the coil to ensure that it’s fully saturated with e-liquid. To do this, take a few deep puffs without pressing the fire button.

3. Start with a low wattage: When using a restored coil, it’s best to start with a low wattage to avoid burning the coil. Gradually increase the wattage until you find the sweet spot for your e-liquid.

4. Check for leaks: After using your vape for a few minutes, check for any leaks around the tank or coil. If you notice any leaks, disassemble your vape and check for any loose or damaged parts.

5. Monitor the flavor: As you use your restored coil, monitor the flavor of your e-liquid. If you notice any burnt taste or other issues, stop using your vape and check the coil again.

By testing your restored coil, you can ensure that it’s working properly and avoid any unpleasant experiences while vaping.

Maintaining Your Vape Coil

If you want to restore an old vape coil, it’s important to maintain it properly. Here are some tips to help you keep your vape coil in good condition.

Regular Cleaning

Regular cleaning is essential to keep your vape coil in good condition. You can clean your vape coil by removing it from your device and rinsing it under running water. You can also use a cotton swab or a toothbrush to remove any dirt or residue. Make sure to dry your vape coil thoroughly before using it again.

Proper Usage

Proper usage is also important to keep your vape coil in good condition. Make sure to use the right wattage and temperature settings for your device. Avoid using your device for extended periods of time, as this can cause your vape coil to overheat and burn out.

When to Replace

Knowing when to replace your vape coil is also important. If you notice a burnt taste or a decrease in vapor production, it may be time to replace your vape coil. You should also replace your vape coil if you notice any damage or wear and tear.

By following these tips, you can help restore an old vape coil and keep it in good condition. Remember to clean your vape coil regularly, use your device properly, and replace your vape coil when necessary.